请帮忙翻译，谢谢（高分）

1 the vacuum pressure anomalies
2 vacuum pressure than the value
3 please automatic vacuum
Please confirm the vacuum tube series, lid, etc have got a flat
Please confirm the vacuum, vacuum valve leads the situation
4 vacuum lead
5. In certain time, vacuum, no drop to value
6 abnormal atmospheric open
7. In certain time to set up no vacuum
8 please confirm vacuum value
9 please confirm the vacuum valve condition leads
10 to liquid, drainage
11. Can finish in time for liquid or drainage action, or give liquid or drainage is done
12 please confirm the liquid level detection sensor
Please confirm the piping system
Please confirm the vacuum valve movements
13. The photoelectric sensor
14 photoelectric sensor or not
15. Please confirm the sensor
Please confirm whether a break
16. Nearly pick sensor
17. Close up or open not sensors
The cylinder
The cylinder within the stipulated time for action or cylinder sensor short-circuit, wire) (
And again, adjust speed controller
Please confirm the cylinder sensor
Please confirm the vacuum tubes, solenoid valves
21. Slot liquid surface below or above the sensor locations
22. Please adjust the solution
Please confirm the liquid valve
Please confirm the liquid surface sensor
Please confirm to valve, pump etc
23) flow under variable
24. Please confirm flow
Please confirm the pump
Please confirm the piping and valves
Please confirm the flow
And cooling water
26 below the setting cooling water flow
27 please confirm cooling water supply and drainage valve is opened
Please confirm the cooling water flow
Please confirm the cooling water piping

自己翻译，有语法错误请多包涵

1. Vacuum pressure anomaly
2. Vacuum pressure exceeds the set value
3. Please vacuumize automaticlly
Make sure the vacuum line piping, cover, etc. there is no leakage
Please confirm that cited vacuum valve, vacuum pump, such as the status of
4. Vacuum lead anomaly
5. At a certain period of time has not declined to the vacuum gauge settings
6. Abnormal atmospheric open
7. At a certain period of time has not risen to the vacuum gauge settings
8. Make sure the setting value of vacuum gauge
9. Make sure that the situation of a vacuum valve cited
10. To the fluid, abnormal fluid
11. Unable to achieve at a certain period of time to the fluid motion liquid or liquid to the liquid has been finished
12. Make sure liquid level sensor
Please confirm piping
Please confirm that the action vacuum valve
13. Photoelectric sensor abnormal
14. Photoelectric sensor no customs or not open
15. Make sure that the sensor
Please confirm whether or not broken
16. Proximity sensor abnormal
17. Proximity sensors not related or not to open
18. Cylinder motion abnormalities
19. Cylinder at the time for action or abnormal cylinder sensor (short circuit, break)
20. To adjust the speed controller
Make sure cylinder sensor
Make sure that the vacuum piping, solenoid valve
21. Trough above or below the liquid level sensor location
22. Please adjust the volume of solution
Make sure liquid valve
Make sure liquid level sensor
Please confirm to the valve to the pump, etc.
23. Flow is lower than set value
24. Make sure that the flow
Make sure pump
Make sure piping, valves
Please confirm flowmeter

25. Cooling water anomaly
26. Cooling water flow is lower than set value
27. Make sure that the cooling water supply, drainage valve is open
Make sure that the flow of cooling water
Make sure that the tubling of cooling water

1. Vacuum pressure anomaly
2. Vacuum pressure exceeds the set value
3. Please automatic vacuum
Make sure the vacuum line piping, cover, etc. there is no leakage
Please confirm that cited vacuum valve, vacuum pump, such as the status of
4. Vacuum anomalies cited
5. At a certain period of time has not declined to the vacuum gauge settings
6. Abnormal atmospheric open
7. At a certain period of time has not risen to the vacuum gauge settings
8. Make sure the vacuum gauge settings
9. Make sure that the situation of a vacuum valve cited
10. To the fluid, abnormal fluid
11. Unable to achieve at a certain period of time to the fluid motion liquid or liquid to the liquid has been finished
12. Make sure liquid level sensor
Please confirm with piping
Please confirm that the action vacuum valve
13. Photoelectric sensor abnormal
14. Photoelectric sensor no customs or not open
15. Make sure that the sensor
Please confirm whether or not broken
16. Proximity sensor abnormal
17. Proximity sensors not related or not to open
18. Cylinder motion abnormalities
19. Cylinder at the time for action or abnormal cylinder sensor (short circuit, break)
20. To adjust the speed controller
Make sure cylinder sensor
Make sure that the vacuum piping, solenoid valve
21. Trough above or below the liquid level sensor location
22. Please adjust the volume of solution
Make sure liquid valve
Make sure liquid level sensor
Please confirm to the valve to the pump, etc.
23. Flow is lower than set value
24. Make sure that the flow
Make sure pump
Make sure piping, valves
Please confirm flowmeter
25. Cooling water anomaly
26. Cooling water flow is lower than set value
27. Make sure that the cooling water supply, drainage valve is open
Make sure that the flow of cooling water

1. Vacuum pressure anomaly
2. Vacuum pressure exceeds the set value
3. Please automatic vacuum
Make sure the vacuum line piping, cover, etc. there is no leakage
Please confirm that cited vacuum valve, vacuum pump, such as the status of
4. Vacuum anomalies cited
5. At a certain period of time has not declined vacuum gauge to set the value of
6. Abnormal atmospheric open
7. At a certain period of time has not risen to the vacuum gauge settings
8. Make sure the vacuum gauge settings
9. Make sure that the situation of a vacuum valve cited
10. To the fluid, abnormal fluid
11. Unable to achieve at a certain period of time to the fluid motion liquid or liquid to the liquid has been finished
12. Make sure liquid level sensor
Please confirm with piping
Please confirm that the action vacuum valve
13. Photoelectric sensor abnormal
14. Photoelectric sensor no customs or not open
15. Make sure that the sensor
Please confirm whether or not broken
16. Proximity sensor abnormal
17. Proximity sensors not related or not to open
18. Cylinder motion abnormalities
19. Cylinder at the time for action or abnormal cylinder sensor (short circuit, break)
20. To adjust the speed controller
Make sure cylinder sensor
Make sure that the vacuum piping, solenoid valve
21. Trough above or below the liquid level sensor location
22. Please adjust the volume of solution
Make sure liquid valve
Make sure liquid level sensor
Please confirm to the valve to the pump, etc.
23. Flow is lower than set value
24. Make sure that the flow
Make sure pump
Make sure piping, valves
Please confirm flowmeter
25. Cooling water anomaly
26. Cooling water flow is lower than set value
27. Make sure that the cooling water supply, drainage valve is open
Make sure that the flow of cooling water
Make sure the cooling water piping

在线翻译很多
http://www.hao123.com/ss/fy.htm

1. Vacuum pressure anomaly
2. Vacuum pressure exceeds the set value
3. Please automatic vacuum
Make sure the vacuum line piping, cover, etc. there is no leakage
Please confirm that cited vacuum valve, vacuum pump, such as the status of
4. Vacuum anomalies cited
5. At a certain period of time has not declined to the vacuum gauge settings
6. Abnormal atmospheric open
7. At a certain period of time has not risen to the vacuum gauge settings
8. Make sure the vacuum gauge settings
9. Make sure that the situation of a vacuum valve cited
10. To the fluid, abnormal fluid
11. Unable to achieve at a certain period of time to the fluid motion liquid or liquid to the liquid has been finished
12. Make sure liquid level sensor
Please confirm with piping
Please confirm that the action vacuum valve
13. Photoelectric sensor abnormal
14. Photoelectric sensor no customs or not open
15. Make sure that the sensor
Please confirm whether or not broken
16. Proximity sensor abnormal
17. Proximity sensors not related or not to open
18. Cylinder motion abnormalities
19. Cylinder at the time for action or abnormal cylinder sensor (short circuit, break)
20. To adjust the speed controller
Make sure cylinder sensor
Make sure that the vacuum piping, solenoid valve
21. Trough above or below the liquid level sensor location
22. Please adjust the volume of solution
Make sure liquid valve
Make sure liquid level sensor
Please confirm to the valve to the pump, etc.
23. Flow is lower than set value
24. Make sure that the flow
Make sure pump
Make sure piping, valves
Please confirm flowmeter
25. Cooling water anomaly
26. Cooling water flow is lower than set value
27. Make sure that the cooling water supply, drainage valve is open
Make sure that the flow of cooling water