华三三层交换划分vlan 端口1到端口5，分别vlan1到vlan5,ip网段划分0.1到4.4，要求vlan之间可以相互访问，

配置命令如下：
创建vlan,加端口，端口类型需要根据实际设备更改。
sys
[h3c]vlan 1
[h3c-vlan1]]port GigabitEthernet 1/0/1
[h3c]vlan 2
[h3c-vlan2]]port GigabitEthernet 1/0/2
[h3c]vlan 3
[h3c-vlan3]]port GigabitEthernet 1/0/3
[h3c]vlan 4
[h3c-vlan4]]port GigabitEthernet 1/0/4
[h3c]vlan 5
[h3c-vlan5]]port GigabitEthernet 1/0/5
给vlan接口配置ip,每个vlan内的计算机将网关指定到vlan接口IP即可实现vlan间互通。
[h3c]int vlan 1
[H3C-Vlan-interface1]ip add 192.168.0.1 24
[h3c]int vlan 2
[H3C-Vlan-interface2]ip add 192.168.1.1 24
[h3c]int vlan 3
[H3C-Vlan-interface3]ip add 192.168.2.1 24
[h3c]int vlan 4
[H3C-Vlan-interface4]ip add 192.168.3.1 24
[h3c]int vlan 5
[H3C-Vlan-interface5]ip add 192.168.4.1 24
给三层交换配置默认路由。建议使用vlan 1的接口连接到路由器，路由器的lan口IP为192.168.0.2。
[H3C]ip route-static 0.0.0.0 0 192.168.0.2
路由器的默认路由
[H3C]ip route-static 0.0.0.0 0 60.173.80.150